INFLATING THE BALLS

 

Blowing up the balls is as simple as blowing up an inflatable mattress. Use an electric air pump to inflate the balls. Either use a pump that plugs into the wall (takes 2 minutes per ball) or into a car adapter (5 minutes per ball).  The fastest way to blow up the balls is to remove the cap and inflate the ball until almost full. Then put the cap on and unscrew the smaller portion of the cap, which only allows air into the ball. Continue inflating until it is hard to squeeze the upper portion of the ball. At that point the ball is fully inflated.

 

Once the ball is inflated make sure straps are looped through the bottom loops and reattached to the upper portion of the straps.

 

To deflate, unscrew the entire cap from the ball and that’s it!

 

TPU vs PVC

 

TPU (Thermoplastic Polyurethane)

  • For heavy use (Leagues and rentals) 

  • Ideal for cold climates

  • Higher flexibility

  • Enviromentally friendly and can be recycled

  • Odorless

  • Higher abrasive resistance

PVC (Polyvinyl Chloride)

  • For occasional use

  • Will harden and discolor

  • Not ideal for cold climates

  • Has Plastic smell

  • Lower cost, but shorter use lifespan

  • Can crack overtime

APPROVED SURFACES TO PLAY ON

 

The only surfaces that are approved to be played on are: grass, artificial turf, sand and hardwood floor. The balls are NEVER to be played on concrete surfaces as these will pop and tear the balls.

HEIGHT AND WEIGHT LIMITS

 

1.5M diameter balls (Large) are for people 4’11” and taller and shorter than 6’7”. Weight limit is 230lbs. Balls 1.2M diameter (Small) are for ages 10 and up and for people between 4’0” and 5’ tall.

RETURN AND LIMITED WARRANTY POLICIES

 

RETURNS/REFUNDS

All sales are final and there will be no returns/refunds once order is placed and paid for.

 

LIMITED WARRANTY

The warranty is only extended to the original purchaser!

 

Please provide an order number for questions regarding warranty services. Bumper Balls will not offer any warranty without this number.

 

Bumper Ball LLC MAKES NO WARRANTY, EXPRESS OR IMPLIED, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, AND EXPRESSLY EXCLUDES AND DISCLAIMS ALL WARRANTIES AND REPRESENTATIONS OF ANY KIND, INCLUDING ANY WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

 

To the extent permitted by law, the Purchaser accepts that Bumper Ball LLC will not be liable for any injury, loss, damage, action, claim, costs or expenses which may arise in consequence of the use of bubble soccer suits and equipment. Bumper Balls/bubble soccer suits require proper training and instruction for use, otherwise, improper instruction and use may lead to injury. Purchaser assumes all risk in this regard.

 

Warranty of products and its parts warrants against defects in materials or workmanship for 90 days for PVC products and 180 days for TPU products once products are delivered.

 

WARRANTY CONDITIONS

The Limited Warranty is subject to the following terms:

  • Warranty extends only to products sold and distributed by Bumper Balls LLC. The warranty is only for products purchased and operated in the USA.

  • Warranty of the product does not include any punctures or deflation of the balls. Any hardware such as straps or rings, that are defective will be replaced from us and will need to be installed/repaired by the customer.

  • Warranty covers normal use of the product. Bumper Balls LLC shall not be liable under this warranty if damages or defects result from abuse, misused or improperly operated.

The following are also NOT included in the warranty:

  • Scratched/scuffing, discoloration or dulling of the bubble suits.

  • Color fading

  • Bleeding and Duplication of printing logos/artwork on the bubbles.

  • Abrasions, rip, punctures and tears that may occur.

  • Has been damaged as a result of shipping, warehousing, storage or installation.

  • Disasters such as fire, flood or lightning.

  • Damage from an accident

  • Damage or deterioration due to UV exposure, harsh solvents or other chemicals

  • Seam separation or glue separation due to heat exposure.

  • Damage caused through irresponsible use.

BUBBLE SOCCER SUITS FAQ

© 2019 Bubble Games Inc.